Admin

Case 14 - Voice-Activated Music Light

1. Products
2. mBot Neo/mBot2

Part 1   Objective After you upload the program, the brightness and number of LEDs lighting up on CyberPi change with the loudness detected by the microphone in real time, allowing you to control...

• Edited August 01, 2023 02:44
• 1 follower
• 0 comments
• -6 votes

Case 15 - Smart night light

1. Products
2. mBot Neo/mBot2

Part 1   Objective After you upload the program, CyberPi detects the ambient light. When the brightness reaches a certain low value and there is sound around, the RGB LEDs on CyberPi light up and...

• Edited April 07, 2023 06:36
• 1 follower
• 0 comments
• 2 votes

Case 16 - Ambulance Siren

1. Products
2. mBot Neo/mBot2

Part 1   Objective After you upload the program, CyberPi emits ambulance sirens. Part 2   Preparation CyberPi x 1 USB cable (Type-C) x 1 Computer with network access x 1 Connect CyberPi t...

• Edited August 01, 2023 02:45
• 1 follower
• 0 comments
• 3 votes

Case 17 - Play Music

1. Products
2. mBot Neo/mBot2

Part 1   Objective After you upload the program, CyberPi plays the song of "Twinkle, Twinkle, Little Star". Part 2   Preparation CyberPi x 1 USB cable (Type-C) x 1 Computer with network a...

• Edited August 01, 2023 02:46
• 1 follower
• 0 comments
• -3 votes

Case 18 - Heartbeat

1. Products
2. mBot Neo/mBot2

Part 1   Objective After you upload the program, the screen of CyberPi displays a beating heart. Part 2   Preparation CyberPi x 1 USB cable (Type-C) x 1 Computer with network access x 1...

• Edited April 07, 2023 06:41
• 1 follower
• 0 comments
• 1 vote

Case 19 - Play Recording

1. Products
2. mBot Neo/mBot2

Part 1   Objective After you upload the program, push the joystick upward to start recording, push the joystick downward to end recording, and press button A to play recording. Part 2   Preparat...

• Edited August 01, 2023 02:47
• 1 follower
• 0 comments
• -4 votes

Case 20 - Launch a rocket

1. Products
2. mBot Neo/mBot2

Part 1   Objective After you upload the program, the screen of CyberPi displays that a rocket is being launched to the upper right corner over and over again. Part 2   Preparation CyberPi x...

• Edited April 07, 2023 06:43
• 1 follower
• 0 comments
• -1 votes

Case 21 - Control Panda's moves

1. Products
2. mBot Neo/mBot2

Part 1   Objective After you compile the program, you can control the moves of Panda with mBlock 5 on your computer by manipulating the joystick on CyberPi. Part 2   Preparation CyberPi x 1...

• Edited April 07, 2023 06:45
• 1 follower
• 0 comments
• -2 votes

Case 22 - Fall alarm

1. Products
2. mBot Neo/mBot2

Part 1   Objective After you upload the program, set CyberPi upright. When the dumping angle of CyberPi is greater than 80 degrees, the speaker raises an alarm, and red LEDs flicker. Press button...

• Edited April 07, 2023 06:48
• 1 follower
• 0 comments
• -3 votes

Case 23 - Control the Rotational Speed

1. Products
2. mBot Neo/mBot2

Part 1   Objective After you upload the program, you can control the rotational speed and direction of the motor connected to Port EM2 by rotating the motor connected to Port EM1. Part 2   Pre...

• Edited August 01, 2023 02:50
• 1 follower
• 0 comments
• 1 vote