Admin
Articles
-
How to set whitelist for web pages?(Chrome for example)
1. Open Chrome browser, click "..." at the top right corner 2. Click “settings” 3. Click “Privacy and security” on the left side bar 4. Choose "Site settings" 5. Find "Allowed to send pop-ups a...
-
Pins
1. pin () in high voltage If the specified pin is in high voltage, the report condition is met. Example: When Halocode starts up, if pin0 is in high voltage, all the LEDs will light up green...
-
14. How to Use IOT Blocks (Case 2)
This guide applies to: mBot2, mBot Neo, and CyberPi. In a Nutshell This is the second example for using the IOT programmng blocks: Use IOT blocks to obtain internet info and display it on CyberPi...
-
Case 24 - Robotic Ant (II)
Part 1 Objective Write a program to make the Robotic Ant turn. Part 2 Preparation Mechanical parts and electronic modules of Robotic Ant USB cable (Type-B) x 1 Computer with network access...
-
Program a Device on mBlock 5
On mBlock 5, you can program Makeblock hardware devices, micro:bit, and Arduino devices as well as sprites. This page describes how to program CyberPi with mBlock 5 on your computer. Connect CyberP...
-
Sensing
1. button is pressed? If the button of Halocode is pressed, the report condition is met. Example: When Halocode starts up, if the button is pressed, the LED animation "rainbow" will be playe...
-
15. How to Use IOT Blocks (Case 1)
This guide applies to: mBot2, mBot Neo, and CyberPi. In a Nutshell Note: Logging in the mBlock 5 account is required before using all IOT blocks. Case 1: Interact between mBot2 and sprites on mBl...
-
Case 25 - Catapult Ram (I)
Part 1 Objective Write a program to make the Catapult Ram catapult balls. Part 2 Preparation Mechanical parts and electronic modules of Catapult Ram USB cable (Type-B) x 1 Computer ...
-
Enable a Device to Interact with a Sprite on mBlock 5
On the Make a Sprite Move and Add Sounds and Costumes pages, we describe how to program a sprite, and on the Program a Device page, we describe how to program a device. This page describe how to u...
-
Lighting
The LED ring of Halocode consists of 12 LEDs. The position and ID of each LED are as follows: 1. play LED animation () until done Play the specified LED animation. There are four options: "...