Admin

Case 6 - Read the value of the ultrasonic sensor

1. Products
2. mBot

Part 1 Objective After you write the program, the stage area of mBlock 5 displays the distance detected by the ultrasonic sensor in real time. Part 2 Preparation mBot x 1 USB cable (Type-...

• Edited April 04, 2023 02:25
• 1 follower
• 0 comments
• -2 votes

Case 19 - Codey Rocky identifies colors

1. Products
2. Codey Rocky

Part 1   Objective After you upload the program, the RGB LED indicator is lit up in the color detected by the IR color sensor at the bottom of Codey Rocky. Part 2   Preparation Assembled Code...

• Edited April 10, 2023 07:55
• 1 follower
• 0 comments
• -1 votes

Case 2 - Detect the black color

1. Products
2. Ultimate 2.0

Part 1   Objective After you compile the program, the stage displays whether the line follower sensor detects the black color in real time. Part 2   Preparation MegaPi x 1 MegaPi RJ25 adapt...

• Edited April 06, 2023 09:28
• 1 follower
• 0 comments
• 2 votes

Case 1 - Control the LEDs

1. Products
2. mBot Mega

Part 1   Objective After you upload the program, the RGB LEDs on the RGB module connected to pin A13 on MegaPi blink and light up one by one. Part 2   Preparation MegaPi x 1 RGB module x 1 3...

• Edited April 07, 2023 07:23
• 1 follower
• 0 comments
• 5 votes

Case 4 - Detect the loudness

1. Products
2. mBot Ranger

Part 1  Objective After you compile the program, the stage displays the ambient loudness, which is detected by the sound sensor. Part 2  Preparation Auriga x 1 USB cable x 1 Computer with networ...

• Edited April 04, 2023 02:53
• 1 follower
• 0 comments
• -1 votes

[User Video] Unboxing & Testing Of MakeBlock Xlight S1 | #codinglight

1. Products
2. xLight

Click here to view the original video on YouTube.

• Edited October 27, 2021 09:58
• 1 follower
• 0 comments
• 0 votes

Color Mixer

1. Products
2. Halocode

  Change the color of the LED ring by RGB values. We'll use touchpad 0, 1, and 2 to control each of the values.     Introduction to Halocode's touchpads Halocode has four touchpads.   Toggle on ...

• Created December 25, 2023 07:06
• 1 follower
• 0 comments
• -1 votes

Tutorial Article Collection

1. Products
2. mBot Neo/mBot2

1. How to Connect CyberPi to mBlock 5 2. How to Connect mBot2 to mBlock 5 3. How to Check Block Reference in mBlock5 4. How to Connect CyberPi/mBot2 via Bluetooth Adaptor 5. How to Connect CyberPi ...

• Edited February 25, 2025 07:08
• 3 followers
• 0 comments
• -1 votes

Extension—Instructions for Extension Center

1. Software & Apps
2. mBlock 5

Click the Sprites tab and click + extension at the bottom of the Blocks area. The Extension center window is displayed. Extension status An extension is in one of the following states: 1. Ready...

• Created July 24, 2023 03:57
• 3 followers
• 0 comments
• -2 votes

Example — [Arduino] Create an LED Extension (Using the Default Arduino Template)

1. Software & Apps
2. mBlock 5 Extension Builder

This page describes how to create an LED block to control an LED connected to Arduino Uno, using an LED module of the Seeed Studio Grove Starter Kit as an example. You can also use an LED module o...

• Edited June 13, 2023 03:08
• 1 follower
• 0 comments
• 3 votes