Case 12 - Flowing Water
Part 1 Objective
After you upload the program, the RGB LEDs on CyberPi light up one by one from LED 1 to LED 5, looking like flowing water.
Part 2 Preparation
CyberPi x 1
USB cable (Type-C) x 1
Computer with network access x 1
Connect CyberPi to the computer by using the cable, open mBlock 5 (PC client or web version), connect CyberPi, and select the Upload mode.
Part 3 Programming
Part 4 Practice
Try to change the light-up sequence of the LEDs.
Try to change the color and the change speed of the LEDs.