Case 6 - Display of Ambient Light Intensity

Case 6 - Display of Ambient Light Intensity

 

Part 1   Objective

After you upload the program, Codey's screen displays the current light intensity. Codey's light sensor is at the small hole in the lower right corner.

20.gif

Part 2   Preparation

  • Codey (robot controller) x 1

  • USB cable x 1

  • Computer with network access x 1

Connect Codey to the computer by using the USB cable, open mBlock 5 (PC client, web version, or mobile app), delete the default device, click +add, select Codey from Device Library and then click Set as mostly used device in the upper left corner, click Connect, and select the Upload mode.

21.gif
22.gif

Part 3   Programming

Use the ambient light intensity block in Sensing blocks and the show ( ) block in Looks blocks, and click Upload to display the ambient light intensity value in real time.

23.gif

Part 4   Practice

  1. Try to record the outdoor light intensity values at different time points of a day.

  2. Try to make Codey detect and tell whether it is in the daytime or at night.

 

 

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.