Part 1 Objective
After you upload the program, mBot Neo starts dancing.
Part 2 Preparation
-
Assembled mBot Neo x 1
-
USB cable (Type-C) x 1
-
Computer with network access x 1
Assemble mBot Neo, connect CyberPi to the computer by using the cable, open mBlock 5 (PC client or web version), connect CyberPi, and select the Upload mode.
Part 3 Programming
Add mBot2 shield from the Extension center, and then program with the blocks added.
Part 4 Practice
Can you come up with other dance movements, lighting effects, and music effects for mBot Neo?
Comments
Article is closed for comments.