1. Makeblock Helping Center
  2. Robot Kits
  3. mBot Neo/mBot2

Case 31 - Robot Following

Avatar
Makeblock Technical Support Team

Case 31 - Robot Following

Part 1   Objective

After you upload the program, mBot Neo robot moves straight forward. When the object to be followed is less than 40cm away from the robot, the robot starts following. When the object to be followed is more than 40cm or less than 8cm away from the robot, the robot stops moving.

94.gif

Part 2   Preparation

  • Assembled mBot Neo robot x 1

  • USB cable (Type-C) x 1

  • Computer with network access x 1

Assemble the robot, connect CyberPi to the computer by using the cable, open mBlock 5 (PC client or web version), connect CyberPi, and select the Upload mode.

95.gif
96.gif

Part 3   Programming

  1. Add mBot2 shield and Ultrasonic Sensor 2, and then program with the blocks added.

97.png

Part 4   Practice

  1. Take your "new pet" to travel around your house.

 

 

Was this article helpful?
0 out of 1 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section

See more