Case 30 - Robot Avoiding Obstacles
Part 1 Objective
After you upload the program, mBot Neo robot moves normally. When the robot encounters an obstacle, it turns left or right randomly.
Part 2 Preparation
Assembled mBot Neo robot x 1
USB cable (Type-C) x 1
Computer with network access x 1
Assemble the robot, connect CyberPi to the computer by using the cable, open mBlock 5 (PC client or web version), connect CyberPi, and select the Upload mode.
Part 3 Programming
Add mBot2 shield and Ultrasonic Sensor 2, and then program with the blocks added.
Part 4 Practice
Build a maze for mBot Neo and see if it can get out of the maze.