Part 1 Objective
After you upload the program, the RGB LEDs on CyberPi light up one by one from LED 1 to LED 5, looking like flowing water.
Part 2 Preparation
-
CyberPi x 1
-
USB cable (Type-C) x 1
-
Computer with network access x 1
Connect CyberPi to the computer by using the cable, open mBlock 5 (PC client or web version), connect CyberPi, and select the Upload mode.
Part 3 Programming
Part 4 Practice
-
Try to change the light-up sequence of the LEDs.
-
Try to alter the color and rate of color change of the LEDs.
Comments
Article is closed for comments.