Case 9 - Access the Internet

Part 1   Objective

After you upload the program, you can connect CyberPi to the Internet and make it read "Hello World".

Part 2   Preparation

  • CyberPi x 1

  • USB cable (Type-C) x 1

  • Computer with network access x 1

Connect CyberPi to the computer by using the cable, open mBlock 5 (PC client or web version), connect CyberPi, and select the Upload mode.



Part 3   Programming

Find AI in the column and drag the blocks you need to the scripts area.

Note: Reading function needs access to the Internet. Ensure that the Wi-Fi network to which CyberPi is connected is working properly. Otherwise, CyberPi may read the texts slowly or even fail to read them.


Part 4   Practice

After being connected to the Internet, CyberPi can not only read texts but also recognize speech. Have a try!



Was this article helpful?
1 out of 2 found this helpful



Article is closed for comments.