Part 1 Objective
After you upload the program, you can control the brightness of the RGB LEDs with the joystick.
Part 2 Preparation
-
CyberPi x 1
-
USB cable (Type-C) x 1
-
Computer with network access x 1
Connect CyberPi to the computer by using the cable, open mBlock 5 (PC client or web version), connect CyberPi, and select the Upload mode.
Part 3 Programming
Toggle the joystick up and down to control the brightness of the RGB LEDs.
Part 4 Practice
Besides the RGB LEDs, what else can you control with the joystick?
Comments
Article is closed for comments.