Part 1 Objective
After you compile the program, the stage displays the ambient loudness, which is detected by the sound sensor.
Part 2 Preparation
- Auriga x 1
- USB cable x 1
- Computer with network access x 1
Connect Auriga to the computer by using the USB cable, open mBlock 5 (PC client or web version), connect CyberPi, and select the Live mode.
Update the firmware of Auriga.
Part 3 Programming
In Live mode, after you select the check box on the left of the sound sensor ( ) loudness block, the stage displays the loudness detected by the sound sensor in real time.
Part 4 Practice
Try to find out the limit of the sound sensor. See what the maximum loudness it can detect is.