Part 1 Objective
After you compile the program, the stage displays the temperature detected by the temperature sensor in real time.
Part 2 Preparation
- Auriga x 1
- USB cable x 1
- Computer with network access x 1
Connect Auriga to the computer by using the USB cable, open mBlock 5 (PC client or web version), connect CyberPi, and select the Live mode.


Update the firmware of Auriga.
In Live mode, after you select the check box on the left of the temperature sensor onboard value °C block, the stage displays the temperature detected by the temperature sensor in real time.

Part 3 Programming

Part 4 Practice
Change the temperature output value of mBot Ranger by changing the ambient temperature.
Comments
Please sign in to leave a comment.