Building mBot Mega

00_mbot_Mega.png

Physical dimension: 

Dimension:192mm(7.5in)*163mm(6.4in)*102mm(4in)
weight:0.8Kg( Without battery)

00.png

 

Parts List

  • -More than 30 parts modules, precise sheet metal processing technology, provide a beautiful and durable structure, which also make assembly easier.
  • -Support different kinds of sensors to achieve more functions.

00_Parts_List.png

Assembly:

Structure assembly

Left motor bracket

01_Left_motor_bracket.gif

Right motor bracket

02_Right_motor_bracket.gif

Install line tracking sensor

03_Install_line_tracking_sensor.gif

 

Connect the motor bracket

04_Connect_the_motor_bracket.gif

 

Install the motor driver modules

05_Install-motor-drive-module.gif

 

Install the electronic module to the Body Shell

06_Install_the_electronic_module_to_the_Body_Shell.gif

 

Install the IR Proximity Sensor to the Upper shell

07_Install_the_IR_Proximity_Sensor_to_the_Upper_shell.gif

Install the Body Shell to the motor bracket

08_Install_the_Body_Shell_to_the_motor_bracket.gif

 

Connecting cables

Connecting motors

09_Connecting_motors.png

 

Connection sequence of electronic modules:

10_Connection_sequence_of_electronic_modules.png

 

The location of the electronic module:

11_The_location_of_the_electronic_module.png

 

Connect all electronic modules and motors with MegaPi.

  • 3pin connection mode provides more freedom. Compatible with almost all 3pin electronic parts, such as sensors, light strips, servo, etc.12_Connect_all_electronic.gif

 

Install the battery holder (Hidden installation method)

13_Install_the_battery_holder.gif

14_Install_the_battery_holder.gif

 

Tip: If you find it hard to replace the batteries after installing the battery holder in the way described in the preceding, you can install the battery holder in another way, as shown in the following figure.

15_Install-the-battery-holder_trunk_.gif

 

 

 

 

Was this article helpful?
4 out of 5 found this helpful

Comments

0 comments

Please sign in to leave a comment.