Using the Preset Programs of mBot Neo

mBot Neo provides eight preset programs, which can be used after you building it.

1. Restart mBot Neo

Before running a preset program, turn mBot Neo off and then turn it on to ensure that it is restarted.

mceclip0.png

2. Enter CyberOS

CyberPi automatically enters CyberOS after you restart mBot Neo. If it doesn’t , press the Home button on CyberPi.

mceclip1.png

3. Choose and execute a program

Take program 1 as an example.
Move the joystick down to choose Switch Program, choose Program1, and press button B to execute the program.

mceclip3.png

 

About program 1

Program1 provides three operation modes. The path design mode is the default mode, and you can press button A on CyberPi to switch between them.

 

① Path design

___1_2x-8.png ② Obstacle avoidance ___1_2x-8.png ③ Line following

 

Mode 1: Path design

In path design mode, the LEDs on CyberPi are lit up in red, and you can use the joystick to plan the path.

mceclip5.png

(1) Move the joystick to plan the running path of mBot Neo.

For example, move the joystick up, to the right, down, and then to the left.
The path you have planned is displayed on the screen of CyberPi.

mceclip6.png

(2) Press button B on CyberPi.

mBot Neo runs in the path you have planned.

mceclip10.png

Mode 2: Obstacle avoidance

In obstacle avoidance mode, the LEDs on CyberPi are lit up in green.

mceclip8.png

Press button B on CyberPi.

mBot Neo automatically detects obstacles while running. When it detects an obstacle, it turns left or right.

mceclip11.png

Mode 3: Line following

In line following mode, the LEDs on CyberPi are lit up in blue.
In this mode, you need to use the map delivered with mBot Neo.

mceclip12.png

Place mBot Neo on the map and press button B on CyberPi.
mBot Neo automatically follows the black line.

mceclip13.png

Have more fun with the preset programs

1. Press the Home button to go to the homepage.
2. Move the joystick down to choose Switch Program, and choose another program.

mceclip0.png

 

Was this article helpful?
1 out of 2 found this helpful

Comments

0 comments

Please sign in to leave a comment.