1. Makeblock Help Center
  2. Products
  3. mBot Ranger

    Update the Firmware of mBot Ranger

    Avatar
    Admin
    Step 1: Connect mBot Ranger to mBlock 5 using a USB cable.
    Step 2: Select mBot Ranger as the device from the Device Library.
    Step 3: Click Setting, and then click Update Firmware.

    Step 4: Wait for the firmware update to complete (in about 3–5 mins).
    1280X1280__76_.PNG  1280X1280__77_.PNG  1280X1280__78_.PNG
    Note: Do not unplug the USB cable while updating to prevent the risk of hardware failure.

     

    Was this article helpful?
    6 out of 16 found this helpful

    Comments

    0 comments

    Article is closed for comments.